Know More

FAQs

These are some of the most common questions and answers about Cordex products, if you couldn’t find your question in the list below, please click on the button to the right and fill in the form to submit your question.

Cordex Agri

Strechtwrap Troubleshooting

Cause

  • Low tack on the film used.
  • Insufficient layers of film applied.
  • Uneven film overlap on bale.
  • Incorrect storage of the bale.

Solução

  • Use a film with high quality tack
  • Apply a minimum of 6 layers of film with a minimum 50% overlap
  • Check turntable speed and correct setting and cleanliness of pre stretch rollers. Film will overstretch if the pre stretch rollers are contaminated with tack.
  • Oversize, or misshapen bales will also cause this as the greater circumference of the bale will require extra turns to ensure correct overlap of film.

Do you have any question or looking for a specific solution?

We are here to help you get the results you want.
Top
Close